咨詢內容：

麻煩改成博易，謝謝

DIFF :EMA(CLOSE,12) - EMA(CLOSE,26);

DEA :EMA(DIFF,9),LINETHICK2;

MACD:=2*(DIFF-DEA);

STICKLINE(MACD>0 AND MACD>REF(MACD,1),MACD,0,COLORRED,0);

STICKLINE(MACD>0 AND MACD<REF(MACD,1),MACD,0,COLORBLUE,0);

STICKLINE(MACD<0 AND MACD>REF(MACD,1),MACD,0,COLORMAGENTA,0);

STICKLINE(MACD<0 AND MACD<REF(MACD,1),MACD,0,COLORGREEN,0);

UPCOND:=CROSS(DIFF,DEA);

DOWNCOND:=CROSSDOWN(DIFF,DEA);

END_N1:=SUMBARS(DOWNCOND,1);

RANGE_N1:=REF(SUMBARS(UPCOND,1),END_N1);

END_N2:=SUMBARS(DOWNCOND,2);

HH1:=REF(HV(H,RANGE_N1),END_N1-1);

HH2:=REF(HV(H,RANGE_N1),END_N2-1);

MACD1:=REF(HV(MACD,RANGE_N1),END_N1-1);

MACD2:=REF(HV(MACD,RANGE_N1),END_N2-1);

頂背離:=CROSS(0,MACD) AND HH1>HH2 AND MACD1<MACD2;

DRAWTEXT(頂背離,DIFF*1.30 ,'頂背離'),RGB(0,255,64);

END_M1:=SUMBARS(UPCOND,1);

RANGE_M1:=REF(SUMBARS(DOWNCOND,1),END_M1);

END_M2:=SUMBARS(UPCOND,2);

LL1:=REF(LV(L,RANGE_M1),END_M1-1);

LL2:=REF(LV(L,RANGE_M1),END_M2-1);

MACD3:=REF(LV(MACD,RANGE_M1),END_M1-1);

MACD4:=REF(LV(MACD,RANGE_M1),END_M2-1);

底背離:=CROSS(MACD,0) AND LL1<LL2 AND MACD3>MACD4;

DRAWTEXT(底背離,DIFF*1.50 ,'底背離'),COLORWHITE;

?

?來源:程序化99網（ m.weiqiv.net.cn ）

博易技術人員： DIFF :EMA(CLOSE,12) - EMA(CLOSE,26);

DEA :EMA(DIFF,9),LINETHICK2;

MACD:=2*(DIFF-DEA);

STICKLINE(MACD>0 AND MACD>REF(MACD,1),MACD,0,10,0),COLORRED;

STICKLINE(MACD>0 AND MACD<REF(MACD,1),MACD,0,10,0),COLORBLUE;

STICKLINE(MACD<0 AND MACD>REF(MACD,1),MACD,0,10,0),COLORMAGENTA;

STICKLINE(MACD<0 AND MACD<REF(MACD,1),MACD,0,10,0),COLORGREEN;

UPCOND:=CROSS(DIFF,DEA);

DOWNCOND:=CROSS(DEA,DIFF);

END_N1:=SUMBARS(DOWNCOND,1);

RANGE_N1:=REF(SUMBARS(UPCOND,1),END_N1);

END_N2:=SUMBARS(DOWNCOND,2);

HH1:=REF(HHV(H,RANGE_N1),END_N1-1);

HH2:=REF(HHV(H,RANGE_N1),END_N2-1);

MACD1:=REF(HHV(MACD,RANGE_N1),END_N1-1);

MACD2:=REF(HHV(MACD,RANGE_N1),END_N2-1);

頂背離:=CROSS(0,MACD) AND HH1>HH2 AND MACD1<MACD2;

DRAWTEXT(頂背離,DIFF*1.30 ,'頂背離'),COLOR40FF00;

END_M1:=SUMBARS(UPCOND,1);

RANGE_M1:=REF(SUMBARS(DOWNCOND,1),END_M1);

END_M2:=SUMBARS(UPCOND,2);

LL1:=REF(LLV(L,RANGE_M1),END_M1-1);

LL2:=REF(LLV(L,RANGE_M1),END_M2-1);

MACD3:=REF(LLV(MACD,RANGE_M1),END_M1-1);

MACD4:=REF(LLV(MACD,RANGE_M1),END_M2-1);

底背離:=CROSS(MACD,0) AND LL1<LL2 AND MACD3>MACD4;

DRAWTEXT(底背離,DIFF*1.50 ,'底背離'),COLORWHITE; 柱蓋住線了，麻煩把線搞外面顯示，謝謝 來源 程序化久久網