咨詢內容：

請老師在優化一下頂底分型指標，圖中畫圓圈的位置沒有形成頂分型，謝謝

MID :? MA(CLOSE,26);
UPPER: MID + 2*STD(CLOSE,26);
LOWER: MID - 2*STD(CLOSE,26);
STICKLINE(1,H,L,1,0),COLORBLUE;

{筆底分型 選股 預警 確保向下筆成立后的底分型}
V00:= HIGH<REF(HIGH,1) AND LOW<REF(LOW,1);
V01:= HIGH<REF(HIGH,1) AND LOW>REF(LOW,1);
V02:= HIGH>REF(HIGH,1) AND LOW<REF(LOW,1);
V03:= HIGH>REF(HIGH,1) AND LOW>REF(LOW,1);
V04:= REF(HIGH,2) < HIGH AND REF(LOW,2) < LOW
AND REF(HIGH,2) > REF(HIGH,1) AND REF(LOW,2) < REF(LOW,1);
V1:= COUNT(V00,6)>=3 AND COUNT(V01 OR V02,5)=0 AND LLVBARS(LOW,6) = 1 AND HHVBARS(HIGH,6) >= 5 AND V03;
V2:= COUNT(V00,7)>=3 AND COUNT(V01 OR V02,6)=1 AND LLVBARS(LOW,7) = 2 AND HHVBARS(HIGH,7) >= 6 AND V04;
V3:= COUNT(V00,7)>=3 AND COUNT(V01 OR V02,6)=1 AND LLVBARS(LOW,7) = 1 AND HHVBARS(HIGH,7) >= 6 AND V03;
V4:= COUNT(V00,8)>=3 AND COUNT(V01 OR V02,7)<=2 AND LLVBARS(LOW,8) = 2 AND HHVBARS(HIGH,8) >= 7 AND V04;
V5:= COUNT(V00,8)>=3 AND COUNT(V01 OR V02,7)<=2 AND LLVBARS(LOW,8) = 1 AND HHVBARS(HIGH,8) >= 7 AND V03;
V6:= COUNT(V00,9)>=3 AND COUNT(V01 OR V02,8)<=3 AND LLVBARS(LOW,9) = 2 AND HHVBARS(HIGH,9) >= 8 AND V04;
V7:= COUNT(V00,9)>=3 AND COUNT(V01 OR V02,8)<=3 AND LLVBARS(LOW,9) = 1 AND HHVBARS(HIGH,9) >= 8 AND V03;
V8:= COUNT(V00,10)>=3 AND COUNT(V01 OR V02,9)<=4 AND LLVBARS(LOW,10) = 2 AND HHVBARS(HIGH,10) >= 9 AND V04;
V9:= COUNT(V00,10)>=3 AND COUNT(V01 OR V02,9)<=4 AND LLVBARS(LOW,10) = 1 AND HHVBARS(HIGH,10) >= 9 AND V03;
V10:= COUNT(V00,11)>=3 AND COUNT(V01 OR V02,10)<=5 AND LLVBARS(LOW,11) = 2 AND HHVBARS(HIGH,11) >= 10 AND V04;
XG:= V1 OR V2 OR V3 OR V4 OR V5 OR V6 OR V7 OR V8 OR V9 OR V10;
DRAWTEXT(FILTER(XG=1,5),L*0.998,'底分型'),COLORYELLOW;
{筆頂分型 選股 預警 確保向上筆成立后的頂分型}
HV00:= HIGH>REF(HIGH,1) AND LOW>REF(LOW,1);
HV01:= HIGH<REF(HIGH,1) AND LOW>REF(LOW,1);
HV02:= HIGH>REF(HIGH,1) AND LOW<REF(LOW,1);
HV03:= HIGH<REF(HIGH,1) AND LOW<REF(LOW,1);
HV04:= REF(HIGH,2) > HIGH AND REF(LOW,2) > LOW AND REF(HIGH,2) > REF(HIGH,1) AND REF(LOW,2) < REF(LOW,1);
HV1:= COUNT(HV00,6)>=3 AND COUNT(HV01 OR HV02,5)=0 AND HHVBARS(HIGH,6) = 1 AND LLVBARS(LOW,6) >= 5 AND HV03;
HV2:= COUNT(HV00,7)>=3 AND COUNT(HV01 OR HV02,6)=1 AND HHVBARS(HIGH,7) = 2 AND LLVBARS(LOW,7) >= 6 AND HV04;
HV3:= COUNT(HV00,7)>=3 AND COUNT(HV01 OR HV02,6)=1 AND HHVBARS(HIGH,7) = 1 AND LLVBARS(LOW,7) >= 6 AND HV03;
HV4:= COUNT(HV00,8)>=3 AND COUNT(HV01 OR HV02,7)<=2 AND HHVBARS(HIGH,8) = 2 AND LLVBARS(LOW,8) >= 7 AND HV04;
HV5:= COUNT(HV00,8)>=3 AND COUNT(HV01 OR HV02,7)<=2 AND HHVBARS(HIGH,8) = 1 AND LLVBARS(LOW,8) >= 7 AND HV03;
HV6:= COUNT(HV00,9)>=3 AND COUNT(HV01 OR HV02,8)<=3 AND HHVBARS(HIGH,9) = 2 AND LLVBARS(LOW,9) >= 8 AND HV04;
HV7:= COUNT(HV00,9)>=3 AND COUNT(HV01 OR HV02,8)<=3 AND HHVBARS(HIGH,9) = 1 AND LLVBARS(LOW,9) >= 8 AND HV03;
HV8:= COUNT(HV00,10)>=3 AND COUNT(HV01 OR HV02,9)<=4 AND HHVBARS(HIGH,10) = 2 AND LLVBARS(LOW,10) >= 9 AND HV04;
HV9:= COUNT(HV00,10)>=3 AND COUNT(HV01 OR HV02,9)<=4 AND HHVBARS(HIGH,10) = 1 AND LLVBARS(LOW,10) >= 9 AND HV03;
HV10:= COUNT(HV00,11)>=3 AND COUNT(HV01 OR HV02,10)<=5 AND HHVBARS(HIGH,11) = 2 AND LLVBARS(LOW,11) >= 10 AND HV04;
HXG:=HV1 OR HV2 OR HV3 OR HV4 OR HV5 OR HV6 OR HV7 OR HV8 OR HV9 OR HV10;
DRAWTEXT(FILTER(HXG=1,3),H*1.01,'頂分型'),COLORGREEN;
<!-- 咨詢內容：

附件 :

-->

?

?來源:程序化99網（ m.weiqiv.net.cn ）

博易技術人員： 無法優化 來源 程序化久久網