咨詢內容：

請老師調整一下

DIFF : EMA(CLOSE,12) - EMA(CLOSE,26),COLORRED,LINETHICK2;
DEA : EMA(DIFF,9),COLORWHITE,LINETHICK2;
MACD : 2*(DIFF-DEA), COLORSTICK;
白線破倉:IF(DIFF<DEA,DIFF,DEA),COLORWHITE,LINETHICK2,NODRAW;
趨勢強弱:IF(DIFF>DEA,DEA,DEA),COLORFF937F,LINETHICK2,NODRAW;

A1:=MACD<REF(MACD,1) AND REF(MACD,2)<REF(MACD,1) AND MACD>0,NODRAW;
A2:=MACD>REF(MACD,1) AND REF(MACD,1)<REF(MACD,2) AND MACD<0,NODRAW;
DRAWTEXT(A1 AND C>O,MACD,'頂背離'),NODRAW;
DRAWTEXT(A2 AND C<O,MACD,'底背離'),NODRAW;




FH1:=REF(MACD,1)<REF(MACD,2) AND REF(MACD,2)<REF(MACD,3) AND REF(MACD,3)<REF(MACD,4);
FH2:=MACD>=0 AND COUNT(MACD>REF(MACD,1),1)=1;
FH3:=FH1 AND FH2 AND EMA(C,13)>REF(EMA(C,13),1);
FH4:=FH1 AND FH2 AND ABS((DIFF-DEA)/C)<0.018;
FH5:=FH1 AND FH2 AND MACD<0.10;
二次翻紅:=(FH3 OR FH4 OR FH5),COLORRED,NODRAW;
低買:=CROSS(DIFF,DEA) AND DIFF<0,COLORFF00FF,NODRAW;
加油:=CROSS(DIFF,DEA) AND DIFF>0,COLORYELLOW,NODRAW;
// DRAWTEXT(二次翻紅,-0.15,'↖翻紅'),COLORRED;

DRAWTEXT(CROSS(DIFF,DEA) AND DIFF<0,DEA-0.02,'低買'),VALIGN0,COLORYELLOW,FONTSIZE30,ALIGN1;
DRAWTEXT(CROSS(DIFF,DEA) AND DIFF>0,DEA+0.02,'高賣'),VALIGN0,COLORGREEN,FONTSIZE30,ALIGN1;
DRAWTEXT(CROSS(DIFF,DEA) AND DIFF<0,DEA-0.02,'↖'),VALIGN0,COLORYELLOW,FONTSIZE60,ALIGN2;
DRAWTEXT(CROSS(DIFF,DEA) AND DIFF>0,DEA+0.02,'↖'),VALIGN0,COLORGREEN,FONTSIZE60,ALIGN2;

//DRAWTEXT(CROSS(DIFF,DEA) AND DIFF>0,DEA-0.05,'↖加油'),COLORYELLOW;
XG:=二次翻紅 OR 低買 OR 加油,NODRAW;

A01:=C>REF(C,4);
NT:=BARSLAST(A01);
TJ11:=9;
TJ13:=ISLASTBAR AND BETWEEN(NT,5,8);
AY:=(BACKSET(TJ11>0,9) OR BACKSET(TJ13>0,NT))*NT;
MM:=BACKSET(NT=9,9);
DRAWNUMBER(MM=1&&AY>0,MACD*0.98,NT,0),COLORYELLOW;
NX:=BACKSET(ISLASTBAR,NT);
DRAWNUMBER(NX&&REFX(NT<9,100),MACD*0.98,NT,0),COLORYELLOW;
//DRAWICON(NT=9,MACD*0.98,'ICO9'),COLORGREEN;


B1:=C<REF(C,4);
NT0:=BARSLAST(B1);
TJ21:=NT0=9 ;
NN:=BACKSET(NT0=9,9);
TJ23:=ISLASTBAR AND BETWEEN(NT0,5,8);
AY1:=(BACKSET(TJ21>0,9) OR BACKSET(TJ23>0,NT0))*NT0;
//N2:=MOD(NT0,9);
DRAWNUMBER(NN=1&&AY1>0,MACD*1.02,NT0,0),COLORGREEN,VALIGN0;
ND:=BACKSET(ISLASTBAR,NT0);
DRAWNUMBER(ND&&REFX(NT0<9,100),MACD*1.02,NT0,0),COLORGREEN,VALIGN0;
//DRAWICON(NT0=9,MACD*1.02,'ICO112'),COLORGREEN;

DRAWICON(CROSS(DIFF,DEA),DEA,'ICO95');
DRAWICON(CROSS(DEA,DIFF),DEA,'ICO96');


死叉:=CROSS(DEA,DIFF);
N1:=BARSLAST(死叉),NODRAW;//{最近一次死叉的位置}
N2:=REF(BARSLAST(死叉),N1+1),NODRAW;//{倒數第二次死叉與倒數第一次死叉的區間}
N3:=REF(BARSLAST(死叉),N2+N1+2),NODRAW;//{倒數第三次死叉與倒數第二次死叉的區間}
CL1:=LLV(C,N1+1),NODRAW;//{最近一次死叉后，最低收盤價}
DIFL1:=LLV(DIFF,N1+1),NODRAW;


CL2:=REF(CL1,N1+1),NODRAW;//{倒數第二次死叉與倒數第一次死叉之間的最低收盤價}
DIFL2:=REF(DIFL1,N1+1),NODRAW;
CL3:=REF(CL2,N1+1),NODRAW;//{倒數第三次死叉與倒數第二次死叉之間的最低收盤價}
DIFL3:=REF(DIFL2,N1+1),NODRAW;
PDIFL2:=INTPART(LOG(ABS(DIFL2)))-1;
MDIFL2:=INTPART(DIFL2/POW(10,PDIFL2));
PDIFL3:=INTPART(LOG(ABS(DIFL3)))-1;
MDIFL3:=INTPART(DIFL3/POW(10,PDIFL3));
MDIFB2:=INTPART(DIFF/POW(10,PDIFL2));
MDIFB3:=INTPART(DIFF/POW(10,PDIFL3));
直接底背離:=(CL1<CL2 ) AND (MDIFB2>MDIFL2) AND (MACD<0 AND REF(MACD,1)<0) AND MDIFB2<=REF(MDIFB2,1);
隔峰底背離:=(CL1<CL3 AND CL3<CL2 ) AND (MDIFB3>MDIFL3) AND (MACD<0 AND REF(MACD,1)<0) AND MDIFB3<=REF(MDIFB3,1);
底部鈍化:=直接底背離 OR 隔峰底背離,NODRAW;
底背離:=((MDIFB2>REF(MDIFB2,1))*REF(直接底背離,1)) OR ((MDIFB3>REF(MDIFB3,1))*REF(隔峰底背離,1)),NODRAW;
//DRAWTEXT(FILTER((REF(DIFF,1)>REF(DIFF,2) AND DIFF<REF(DIFF,1)),1),DIFL2,'鈍化開始'),COLORYELLOW;
//STICKLINE(底部鈍化,DIFF,DEA,1,0),COLORRED;
DRAWTEXT(FILTER(底背離,1),DIFF,'底部結構形成'),VALIGN0,COLORMAGENTA,FONTSIZE30;


金叉:=CROSS(DIFF,DEA);
M1:=BARSLAST(金叉),NODRAW;//{最近一次金叉的位置}
M2:=REF(BARSLAST(金叉),M1+1),NODRAW;//{倒數第二次金叉與倒數第一次金叉的區間}
M3:=REF(BARSLAST(金叉),M2+M1+2),NODRAW;//{倒數第三次金叉與倒數第二次金叉的區間}
CH1:=HHV(C,M1+1),NODRAW;//{最近一次金叉后，最高收盤價}
DIFH1:=HHV(DIFF,M1+1),NODRAW;


CH2:=REF(CH1,M1+1),NODRAW;//{倒數第二次金叉與倒數第一次金叉之間的最高收盤價}
DIFH2:=REF(DIFH1,M1+1),NODRAW;
CH3:=REF(CH2,M1+1),NODRAW;//{倒數第三次金叉與倒數第二次金叉之間的最高收盤價}
DIFH3:=REF(DIFH2,M1+1),NODRAW;
PDIFH2:=INTPART(LOG(ABS(DIFH2)))-1;
MDIFH2:=INTPART(DIFH2/POW(10,PDIFH2));
PDIFH3:=INTPART(LOG(ABS(DIFH3)))-1;
MDIFH3:=INTPART(DIFH3/POW(10,PDIFH3));
MDIFT2:=INTPART(DIFF/POW(10,PDIFH2));
MDIFT3:=INTPART(DIFF/POW(10,PDIFH3));
直接頂背離:=(CH1>CH2 ) AND (MDIFT2<MDIFH2) AND (MACD>0 AND REF(MACD,1)>0) AND MDIFT2>=REF(MDIFT2,1);
隔峰頂背離:=(CH1>CH3 AND CH3>CH2 ) AND (MDIFT3<MDIFH3) AND (MACD>0 AND REF(MACD,1)>0) AND MDIFT3>=REF(MDIFT3,1);
頂部鈍化:=直接頂背離 OR 隔峰頂背離,NODRAW;
頂背離:=((MDIFT2<REF(MDIFT2,1))*REF(直接頂背離,1)) OR ((MDIFT3<REF(MDIFT3,1))*REF(隔峰頂背離,1)),NODRAW;
//STICKLINE(頂部鈍化,DIFF,DEA,1,0),COLORGREEN;
MACDDIF:=IF(ABS(MACD)>ABS(DIFF),MACD,DIFF);
DRAWICON(REF(DIFF,1)>REF(DIFF,2) AND DIFF<REF(DIFF,1) AND DIFF>0 AND DIFF>DEA,MACDDIF*1.1,'ICO96'),COLORGREEN;
DRAWICON(REF(DIFF,1)<REF(DIFF,2) AND DIFF>REF(DIFF,1) AND DIFF<0 AND DIFF<DEA,MACDDIF*1.1,'ICO95'),COLORRED;

DRAWTEXT(FILTER(頂背離,1),DIFF,'頂部結構形成'),VALIGN0,COLORCYAN,FONTSIZE30;


老師ICO95,ICO96能改成上下箭頭嗎，高賣低買能調整到金叉之后的最高點死叉之后的最低點嗎

?

?來源:程序化99網（ m.weiqiv.net.cn ）

博易技術人員： 您好，按照這個修改的公式信號出的圖形，不能修改。 來源 程序化久久網